Mounted atomizers are ideal for small and medium-sized plantations of fruits, olives and vines. The deflector directs the air currents so that the jet, carried by the air stream, covers only the treated area.

The tank is polyethylene and consists of three parts: the main one with filter and cover, hand-washing tank with faucet and rinsing tank. The fan is Ø700 mm (7 feathers with the possibility of regulation). Stainless steel tube nozzles holder. Double adjustable brass nozzle with anti-drip and ceramic nozzles. Transmission by one speed multiplier with declutch lever. The filter has the possibility of self-filling from natural sources (wells, reservoirs for water accumulation, sources, etc.). The homogenization of the preparation is accomplished by a hydro-injector. The bottom hinge is realized in three points with a Ø22 / 28 mm sleeve. There is also the possibility of installing fins, extended hoses to the tractor cabin, electronic pressure regulator and other equipment, as stated in the accessories.





Three tanks: polyethylene with filter and cover 400/600L, hand-washing tank 15L with faucet, rinsing tank 40/60L;

Total emptying system;

Varnished steel frame;

Three ways pressure regulator;

Pump Dal Degan - aluminum DL260 - 2 diaphragms, flow 60 L / min, maximum pressure 40 bar;

Varnished steel Diffuse;

Stainless steel tube nozzles holder;

10 double adjustable brass nozzle GEOLINE with anti-drip and ceramic tiles Ø18mm with hole 0.8 and 1.2mm;

Multiplier drive CMV MA501/40 transmission ratio 1:4.5, with one speed;

Fiberglass fan ELIVENT ø 700 mm with adjustable blades with angle 20 - 45°;

Filter (50mesh=300µm) GEOLINE with self-filling possibility;

Hydraulic injector GEOLINE with nozzle Ø1,25mm;


Top directional fins for diffusor D.700mm;

Extended hoses to the tractor cabin;

Electronic pressure regulator;

Top nozzles "LONG SPRAYING” (2 nozzles together);

Multiplier drive CMV MA501/40 transmission ratio 1:4.53 and 1:3.82, with two speed;

Cardan shaft L=800mm, with PVC plastic protection;

Liquid filling kit with joint Φ 30mm (5 m hose + filter D.40);

Surcharge for powder mixer on filter tank;

Hydraulic injector (mixer + injector);

Tank rinsing - a showerManometar Φ 100 mm;

Red warning kit;

Leaves protection for 700 mm d. fan 980*225mm;

Rear bumper for diffusor D.700mm;


tab sakan extra eng




Go to top
JSN Boot template designed by